 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| P6KE6.8 THRU P6KE440CA Features * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated junction * 600W peak pulse power capability with a 10/100iS waveform, reptition rate(duty cycle) : 0.01% * Excellent clamping capability * Low incremental surge resistance * Fast response time : typically less than 1.0ps from 1 Volts to V(BR) for uni-directional and 5.0ns for Bi-directional types * Typical ID less than 1.0A above 10V i * High temperature soldering guaranteed : 265E /10seconds, 0.375"(9.5mm) lead length, 5lbs. (2.3kg) tension POWER 600Watts VOLTAGE 6.8 to 440 Volts DO-15 0.140(3.6) 0.104(2.6) DIA. 1.0(25.4) MIN. 0.300(7.6) 0.230(5.8) Mechanical Data * Case : DO-15 molded plastic body over passivated junction * Terminals : Solder plated axial leads, solderable per MIL-STD-750, method 2026 * Polarity : For uni-directional types the color band denotes cathode end. which is positive with respect to the anode under normal TVS operation * Mounting Position : Any * Weight : 0.014 ounce, 0.33 gram 1.0(25.4) MIN. 0.034(0.9) 0.028(0.7) DIA. Dimensions in inches and (millimeters) Devices For Bidirectional Applications * For bi-directional use C or CA suffix for types P6KE7.5 thru types P6KE440CA(e.g. P6KE10C, P6KE220CA), electrical characteristics apply in both directions. Maximum Ratings And Electrical Characteristics (Ratings at 25E ambient temperature unless otherwise specified) Symbols Peak power dissipation with a 10/1000iS waveform (Note 1. Fig. 3) Peak pulse current with a 10/1000iS waveform (Note 1) Steady state power dissipation at TL=75E lead length 0.375"(9.5mm) (Note2) Peak forward surge current, 8.3mm single half sine-wave superimposed on rated load(JEDEC method) undirectional (Note 3) Maximum instantaneous forward voltage at 50A for unidirectional only(Note4) Operating junction and storage temperature range PPPM IPPM PM(AV) IFSM VF TJ,TSTG Values Min.600 See Table 1 5.0 100.0 3.5/50 -55 to +175 Units Watts Amps Watts Amps Volts E Notes: (1) Non repetitive current pulse, per Fig.3 and derated above TA=25E per Fig.2 (2) Mounted on copper pads area of 1.6 1.6"(40 40mm) per Fig.5 (3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulse per minute maximum (4) VF=3.5 Volts max. for devices of V(BR)A220V, and VF=5.0 Volts max. for devices of V(BR)>220V ELECTRICAL CHARACTERISTIC at (TA=25E unless other specified) Device Type P6KE6.8 P6KE6.8A P6KE7.5 P6KE7.5A P6KE8.2 P6KE8.2A P6KE9.1 P6KE9.1A P6KE10 P6KE10A P6KE11 P6KE11A P6KE12 P6KE12A P6KE13 P6KE13A P6KE15 P6KE15A P6KE16 P6KE16A P6KE18 P6KE18A P6KE20 P6KE20A P6KE22 P6KE22A P6KE24 P6KE24A P6KE27 P6KE27A P6KE30 P6KE30A P6KE33 P6KE33A P6KE36 P6KE36A P6KE39 P6KE39A P6KE43 P6KE43A P6KE47 P6KE47A P6KE51 P6KE51A P6KE56 P6KE56A Breakdown Voltage V(BR) (Volts) (Note 1) Max. 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 Min. 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 Test Current at IT (mA) 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Stand-off Voltage VWM (Volts) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 Max. Reverse Leakage at VWM ID(Note2) (iA) 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Max. Peak Pulse Current IPPM(Note 2) (Amps) 55.6 57.1 51.3 53.1 48.0 49.6 43.5 44.8 40.0 41.4 37.0 38.5 34.7 35.9 31.6 33.0 27.3 28.3 25.5 26.7 22.6 23.8 20.6 21.7 18.8 19.6 17.3 18.1 15.3 16.0 13.8 14.5 12.6 13.1 11.5 12.0 10.6 11.1 9.7 10.1 8.8 9.3 8.2 8.6 7.5 7.8 Max. Clamping Voltage at IPPM VC(VOLTS) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 Max. Temp Coefficient of V(BR) (%/E ) 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 ELECTRICAL CHARACTERISTIC at (TA=25E unless other specified) Device Type P4KE62 P4KE62A P4KE68 P4KE68A P4KE75 P4KE75A P4KE82 P4KE82A P4KE91 P4KE91A P4KE100 P4KE100A P4KE110 P4KE110A P4KE120 P4KE120A P4KE130 P4KE130A P4KE150 P4KE150A P4KE160 P4KE160A P4KE170 P4KE170A P4KE180 P4KE180A P4KE200 P4KE200A P4KE220 P4KE220A P4KE250 P4KE250A P4KE300 P4KE300A P4KE350 P4KE350A P4KE400 P4KE400A P4KE440 P4KE440A Breakdown Voltage VF(BR) (Volts) (Note 1) Max. 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 209 225 237 270 285 315 333 360 380 396 418 Min. 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 330 315 385 368 440 420 484 462 Test Current at IT (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Stand-off Voltage VWM (Volts) 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 Max. Reverse Leakage at VWM ID(Note2) (iA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Max. Peak Pulse Current IPPM(Note 2) (Amps) 6.7 7.1 6.1 6.5 5.6 5.8 5.1 5.3 4.6 4.8 4.2 4.4 3.8 3.9 3.5 3.6 3.2 3.4 2.8 2.9 2.6 2.7 2.5 2.6 2.3 2.4 2.1 2.2 1.7 1.8 1.7 1.7 1.4 1.4 1.2 1.2 1.0 1.1 0.95 1.0 Max. Clamping Voltage at IPPM VC(VOLTS) 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 Max. Temp Coefficient of V(BR) (%/E ) 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 Notes: (1) V(BR) measured after IT applied for 300iS, IT=square wave pulse or equivalent. (2) Surge current waveform per Fig.3 and derated per Fig.2 (3) For bidirctional types having VWM of 10 Volts and less. The ID limit is doubled. RATINGS AND CHARACTERISTIC CURVES P6KE6.8 THRU P6KE440CA FIG.1-PEAK PULSE POWER RATING CURVE FIG.2-PULSE DERATING CURVE PPPM, PEAK PULSE POWER, KW NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIG.3 TA =25E PEAK PULSE POWER(PPP) OR CURRENT (IPPM) DERATING IN PERCENTAGE,% 100 100 75 10 50 1.0 25 0.1 0.1mS 1.0mS 10mS 100mS 1.0mS 10mS 0 0 25 50 75 100 125 150 175 200 td, PULSE WIDTH, sec. TA, AMBIENT TEMPERATURE (E ) FIG.3-PULSE WAVEFORM 150 tr=10msec. PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPPM FIG.4-TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL 100,000 6000 MEASURED at ZERO BIAS PPPM, PEAK PULSE current (%) 100 CJ,JUNCTION CAPACITANCE,pF PEAK VALUE IPPM 1000 TJ =25E f=1.0MHz Vsig=50mVp-p HALF VALUE-IPPM 2 50 10/100msec.WAVEFORM as DEFINED by R.E.A. td 100 0 0 1.0 2.0 t, TIME, ms 3.0 4.0 MEASURED at STAND-OFF VOLTAGE, VWM 10 1.0 10 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS FIG.5-STEADY STATE POWER DERATING CURVE 5.00 PM(AV), STEADY STATE POWER DISSIPATION, WATTS L=0.375"(9.5mm) LEAD LENGTHS 60Hz RESISTIVE OR INDUCTIVE LOAD FIG.6-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY IFSM, PEAK FORWARD SURGE CURRENT, AMPERES 200 100 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 3.75 2.50 1.6X1.6X0.040" (40X40X1mm) COPPER HEAT SINKS 1.25 0 0 0 1 10 NUMBER OF CYCLES AT 60HZ 100 25 50 75 100 125 150 175 200 TL, LEAD TEMPERATURE (E ) RATINGS AND CHARACTERISTIC CURVES P6KE6.8 THRU P6KE440CA FIG7-TYPICAL REVERSE LEAKAGE CHARACTERISTICS 10 ID, INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES MEASURED AT DEVICES STAND-OFF VOLTAGE, VWM 1 0.1 TA=25E 0.01 0.001 0 100 200 300 400 440 500 V(BR), BREAKDOWN VOLTAGE, VOLTS Description This P6KE TVS series is a low cost commercial products for use in applications where large voltage transients can permanently damage voltage-sensitive components. The P6KE series device types are designed in a small package size where power and space is a consideration. They are characterized by their high surge capability, extremely fast response time, and low impedance, (Ron). Because of the unpredictable nature of transients, and the variation of the impedance with respect to these transients, per se, is not specified as a parametric value. However, a minimum voltage at low current conditions (BV) and a maximum clamping voltage (Vc) at a maximum peak pulse current is specified. In some instances, the thermal effect (see Vc clamping voltage) may be responsible for 50% to 70%, of the oberved voltage differential when subjected to high pulses for several duty cycle, thus making a maximum impedance specification insignificant. In case of a severe current overload or abnromal transient beyond the maximum ratings. The Tansient Voltage Suppressors will initially fail "short" thus tripping this system circuit breaker or fuse while protecting the entire circuit. Curves depicting clamping voltage vs, various current pulses are available from the factory. Extended power curves vs, pulse time are also available. |
Price & Availability of P6KE36
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |